DISPLAY
INSTALLATION GUIDE
Installation video
Step 1 - Install display mount
1. Remove the blue tape under the mount. Hold the display mount so the face plate is facing towards the steering wheel. Insert the J-shaped hook on the display mount into the vent in the dashboard
2. Pull the display mount slightly toward the steering wheel so the J-shaped hook is properly in place.
3. Press downward on the display mount so the edge snaps into place over the silver trim.
4. Connect power cable to display where the red circle is located at the picture below
5. Attach display to mount
6. Connect power cable to USB port
1. Remove the blue tape under the mount. Hold the display mount so the face plate is facing towards the steering wheel. Insert the J-shaped hook on the display mount into the vent in the dashboard
2. Pull the display mount slightly toward the steering wheel so the J-shaped hook is properly in place.
3. Press downward on the display mount so the edge snaps into place over the silver trim.
4. Connect power cable to display where the red circle is located at the picture below
5. Attach display to mount
6. Connect power cable to USB port
Step 2 - Make sure that the Display is
connected with USB in your car
(Powering up display the first time may take up to 30 seconds)
Step 3 - Turn on personal hotspot on your phone
Display uses internet to connect to car
iPhone - To set up a personal hotspot on your iPhone ,
go to settings --> personal hotspot--> turn on Allow others to join -->
select password and remember your device name
Android - Go to Connections > Mobile Hotspot and Tethering > Mobile Hotspot, while LG only asks you to tap Settings > Tethering.
select password and remember you device name.
Step 4 - Download NUXON hud app from
Apple store or Google play
Step 5 - Open NUXON Display app and sign in
with your Tesla account
Syncing car with app is only required once
Step 6 - Connect your Nuxon display with
your personal hotspot
type in your phone name and hotspot password
